For Bambu Lab X2D P2S X1 P1S Carbon Build Plate A1 PEI Sheet Textured Double Sided PEO PET Bed For Bambulab P1P X1C Build Plate

X1C P1P P1S P2S A1 X1 X2D Build Plate for Bambu Lab A1 Smooth PEI Sheet PEO PET for Bambulab P1P 3D Printer Heatbed Build PlateSpecification:Size: 257x257mmSuitable for Bambu Lab X1, X1-Carbon, P1P, P1S, P2S, X1E, A1,X2DApplicable consumables:PEO/PET to print PLA , PETG;PEY to print PLA, PETG, TPU, ABS;Black smooth PEI to print PLA, PETG, TPU.PEI to print PLA /PETG/PC/ABS/TPU /Nylon etc.The corresponding temperature PLA: 60-65℃; TPU: 30-40℃; PETG: 70-80℃, ABS: 80-100℃Use Tips:① There is a protective film on the surface, please remove it before use.② Before printing, make sure the build plate is clean, no fingerprints or dust.③ If you touch the plate surface and leave fingerprints, then you will find some patterndisappear, don't worry, please wipe with a wet tissue, and then dry the surface with a dry tissue, the pattern will reappear.Packing List:1Pcs 257*257mm build plateDetailed Pictures:**Q1: What is the size and compatible printer models?A: Size 257×257mm. Fits Bambu Lab X1, X1C, P1P, P1S, P2S, X1E, A1, X2D. Not for other‑size printers. **Q2: Can I print directly out‑of‑box?A: No. Peel off the clear protective film on both sides before first use. Keep the plate surface clean, free of fingerprints, oil and dust, otherwise adhesion will be poor. **Q3: Do I need to change settings for X1 series in Bambu Studio?A: Yes. Turn off “Enable detection of build plate position”. Select correct PEI / high‑temp plate type in slicer to avoid error alerts. **Q4: How to remove printed models? Will the steel sheet bend permanently?A: Take out the spring‑steel sheet and gently bend it, models pop off easily without scraper. High‑elastic spring steel bounces back flat and will not stay deformed. **Q5 How to fix fingerprints and faded surface pattern?A: Wipe with wet tissue then dry thoroughly, the surface pattern will restore. Wear gloves during handling to avoid leaving fingerprints.